Make NoiseX-PAN Stereo Mixer + Crossfader
-
Free
Shipping -
No Hassle
Returns -
Extended
Warranty -
Low Prices
Guaranteed
Make Noise X-PAN Voltage Controlled Mixer
The Make Noise X-PAN is a five-channel stereo mixer that is highly responsive to control signals, allowing for deep exploration of the stereo field. This means that the X-PAN can create fluctuating stereo sidebands thanks to an aptitude for audio rate crossfading and panning. X-PAN features two full featured stereo channels that boast voltage controlled cross-fading and panning.
The fifth is a simpler channel that serves as a stereo aux input, and also includes a stereo VCA. All of these channels are then combined into the Sum output.
However, the X-PAN isn't done yet, as the module also features direct coupled inputs and outputs. This gives X-PAN a secondary use as a complex CV router. With all these features, stunningly low noise, and a high-headroom signal path, X-PAN begins yet another chapter in Make Noise's legacy of innovation.
Make Noise X-PAN Features
- 5 Channel Inputs all routed to a dynamic Stereo Output
- CV controllable Panning, Cross-fading, and Mixing
- High Headroom/Low-noise circuitry to maintain signal fidelity
- Direct Coupled for use as a Complex CV router
- Width: 10 HP
- Depth: 30mm
- Current Draw: 145mA @ +12V, 110mA @ -12V
Buying Guide: Eurorack DelaysThe Best Echo Effects for Your Modular SynthesizerMake Noise X-PANHow to Get Excited About a MixerA First Look at Make Noise's XPO Stereo OscillatorNew Module Revealed with Designer Tony RolandoStaff Picks: Best Electronic Music Gear of 2022Eurorack Modules, Drum Machines, Effect Pedals, Video Synths, and MoreSuperbooth 2019The More Synths, The MerrierX-PAN is highly responsive to control signals allowing for exploration of the fluctuating stereo sidebands possible with Audio Rate Crossfading and Panning. X-PAN is Direct coupled for use as a CV Processing and Routing toolbox.
X-PAN consists of two full featured Channels and one simpler Channel. The top two Channels each have voltage controlled cross-fading and panning while the third Channel is a stereo aux input with stereo VCA. All three Channels are combined together at the stereo SUM outputs.
-5 signal inputs all routed to a dynamic stereo output
-Fully Voltage Controlled Panning, Cross-fading and Mixing
-Easy to maintain signal integrity with high headroom, low noise circuitry
-Highly responsive to all control signals including Audio Rate
-Audio Rate crossfading and panning, fluctuating stereo sidebands
-Aux Stereo Inputs controlled by Stereo VCA with Combo Pot
-Direct Coupled for use as Complex CV router
-Pairs well with QPAS and Morphagene