Rupert Neve Designs551 Inductor EQ
- Free
Shipping - No Hassle
Returns - Extended
Warranty - Low Prices
Guaranteed
Rupert Neve Designs 551 Inductor EQ
Inspired by some of Rupert Neve’s vintage EQ designs, the 551 features a low frequency bands that produces a characteristically creamy and resonant bass response. However, the 551 implements a new feature here that sets it apart from its predecessors: its LF band operates as either a peak or shelf filter for added punch, dimension, and management of low-end frequencies.
The unit’s midrange band is ideal for vocals and instruments, affording them that much coveted “extra space” that is frequently sought after in most audio mixes. Its high-frequency band is a vintage/modern hybrid with bedding inductor circuitry and capacitor-based topologies that afford characteristically vintage tones and improved control. The high-pass filter is 12dB/Oct and enjoys a fixed 80Hz frequency, meaning it can be used alongside the low frequency EQ for extra low-end impact.
551 Features
- Inductor EQThe first 500-Series EQ designed by Rupert Neve. 551 EQ’s are built around custom-wound Inductors and are based on our favorite bands from Mr. Neve’s classic EQ modules
- Low EQ+/- 15dB Shelf or Peak, selectable at 35 Hz, 60 Hz, 100 Hz or 220 Hz
- Mid EQ+/- 15dB with 6 center frequencies; 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz, with High Peak switch to narrow the bandwidth (increase the Q) of the filter
- High Shelf+/- 15dB Shelf or Peak selectable at 8 kHz or 16 kHz
- HPF12 dB/octave high pass filter with a fixed 80 Hz frequency
- Transformer I/OBuilt around Rupert’s custom transformers, designed especially for the 500-Series format
Equalizer Bypassed
- Noise: Measured at Main Output, un-weighted, 22Hz-22kHz, source impedance 40 Ohms balanced. Better than -102dBV
- Frequency Response: Main output, no load +/- 0.1dBu from 20Hz to 31.5kHz -1dB @ 120kHz
- Maximum Output Level: 23.25dBu
- Total Harmonic Distortion and Noise: @ 1kHz, +20dBu output level, no load. Better than 0.0025% @ 20Hz, +20dBu output level, no load. 0.13% Typical
- High Pass Filter: -2.7dB @ 80Hz Slope: 12dB/Octave
Equalizer Engaged
- Noise: Measured at Main Output, un-weighted, 22Hz-22kHz, source impedance 40 Ohms balanced. Better than -94dBV
- Frequency Response: Main output, no load +/- 0.25dBu from 20Hz to 45kHz -2dB @ 120kHz
- Maximum Output Level: 23dBu
- Total Harmonic Distortion and Noise: @ 1kHz, +20dBu output level, no load. Better than 0.009% @ 20Hz, +20dBu output level, no load. 0.13% Typical
Power Requirements
- 120mA on +16VDC 110ma on -16VDC
Welcome Back!
Not a member yet?
You're in!
Join the Club!
As a member, get...
You're in the Club!