Cranborne AudioCamden EC1 Microphone Preamp + Headphone Mixer


In Stock Available immediately!
  • Free Shipping
  • No Hassle Returns
    No Hassle
  • Warranty
  • Low Price Guarantee'
    Low Prices

Cranborne Audio Camden EC1 Microphone Preamp + Headphone Mixer

The Camden EC-1 is a studio-grade preamp and high-quality headphone amp that offers incredibly clean and precise amplification with the added bonus of a dual saturation circuit. Add nearly 70dB of ultra-clean gain to your signal. The response is incredibly linear with less than four degrees of phase shift and less than 0.00025% THD+N. The incredibly wide frequency response ranges from less than 1Hz-1000kHz at 35dB of gain. Select between mic, line, or high-Z input, with a front panel input for line and high-Z signals and +48V phantom power on the mic channel. The headphone output offers latency-free analog monitoring with independent level controls for Ch1, Aux, and the ext input.

While cleanliness is useful for many scenarios, sometimes you need a little extra character, which is where the Mojo section comes in. Select between two styles, Cream and Thump. Cream adds transform-style transient shaping and boosts odd/even harmonics, while at the same time reducing the amplitude of the fundamental frequencies. Thump gives you a deep low-end boost by highlighting odd/even harmonics below 160Hz. Connect to your other Cranborne Audio gear using the C.A.S.T. system which bidirectionally transmits audio over Cat-5 cables. Whether you need astonishingly clean and pristine recording or if you want to dial in the perfect amount of character, EC-1 delivers the perfect sound.

Camden EC1 Features

  • Mic/instrument preamp and headphone amplifier
  • Incredibly clean performance with minimal phase shift noise, and harmonic distortion
  • Mojo circuit adds saturation with two modes
  • XLR mic input or 1/4" instrument/high-Z input
  • Latency-free headphone amplifier with level controls
  • Phase reversal
  • Fixed high pass filter
  • +48V phantom power that charges up to prevent damage to ribbon microphones
  • C.A.S.T. connection for use with other Cranborne Audio devices
  • AUX and ext inputs
  • Link connection for parallel amp processing
  • Wide frequency response
  • Inputs: XLR mic, high-Z line 1/4", 1/4" Aux, 1/4" EXT
  • Outputs: 1/4" headphone, 1/4" main, XLR main, 1/4" link
  • C.A.S.T. system connection for use with other Cranborne Audio equipment
  • Frequency response: <1Hz to >100kHz at 35dB gain, <5Hz to 200kHz at max gain
  • THD+N: <0.00025% at 1kHz 35dB gain +24dBu out
  • 8.6 x 1.75 x 9.5"/220 x 44.45 x 240mm
  • 24V 1.25A 30W power supply (included) 100-240V 50-60Hz
Cranborne Audio Camden EC1 Microphone Preamp + Headphone Mixer Reviews