Rob PapenRP-Distort

Rob Papen RP-Distort

All Software Sales Are Final: There will be NO REFUNDS or EXCHANGES accepted.It is the sole responsibility of the purchaser to ensure that the correct products are ordered.

Note: This product is a digital download. You will receive your authorization serial number by email within 1 business day.

RP-Distort is not just a distortion unit, but much more. The distortion unit inside RP-Distort can be combined with an analog modelled filter, compressor and widener unit.

These units can be re-order, but also can be turned on or off. So in case you only want a great analog modelled filter... RP-Distort can offer this. Or only the unique widener unit which is great for widening a boring mono track.

On top of that, the controls can be modulated using midi sources or by one of the 4 build in LFO?s that can sync to your host tempo..

The distortion unit offers 33 distortion types included ring modulator, FM, two band distortions and lo-fi. Inside this section you can also find the EQ and noise-gate.

RP-Distort is in fact a wicked FX unit that will distort or alter your tracks in an inspirational way!

RP-Distort Features

• Amp Simulator: Amplifier simulation effect. Several types of amp types are simulated. Great for creating edgy sounds.Type of amp simulation. Settings are:- None, 4x10" guitar speakers, 4x12" guitar speakers, Bass speaker, Combo speaker and Radio speaker.Distort Amount of distortion added to the sound.
• Cabinet Simulator: Several types of cabinet types are simulated. Great for creating edgy sounds.Type of cabinet simulation. Settings are:- None,Fender,Marshall & Off Axis.Distort Amount of distortion added to the sound.
• Clipper: Hard clipper, this limits output which is to above or below the set clipping levelNegative The clipping level for the negative signal. From 0% (no clipping) to 100% (maximum clipping).Positive The clipping level for positive signal. From 0% (no clipping) to 100% (maximum clipping).Amount, the amount of clipping from 0% (no clipping) to 100% (fully clipped)
• Cos: Cosine distortion effect.Frequency, Frequency of the cosine effect.Amount, Amount of cosine distortion
• Cross 1: Cross, Position for cross distortionAmount, Amount of cross distortion
• Cross 2: Negative Cross distortion position for the negative signalPositive Cross distortion position for the positive signal.Amount, Amount of cross distortion.
• Foldover: Fold-over distortion, this amplifies and then 'folds over' the sound.Frequency Frequency of the fold-over distortion.Amount, Amount of fold-over distortion
• Fuzz: Fuzz-box distortionFrequenter Frequency of the fuzz-distortion effectAmount, Amount of fuzz distortion
• Gapper: Gapper distortion,Frequency Frequency of the gapper distortion effectAmount, Amount of fuzz distortion
• Hard-limiter: Hard limiter, this limits output which is to above or below the set limit level and thenboosts the signal.Limit The clipping level for the signal. From 0% (no limiting) to 100% (maximum limiter).Amount, The amount of post-limiting boosting.
• Low-Fi: Low-Fi effect, this reduces the sample & bit rate & adds noise to the signal.Bits Bit level of the signal.Sample Rate Sample rate of the signal.Noise Amount of noise added to the signal.
• OverDrive: Over-drive effectDrive, Drive for the over-drive effectAmount Over-drive mixing amount.
• Octave 1: Octave effect, this shifts the sound up an octave, Negative Mixing for the negative signal. Positive Mixing for the positive signal.
• Octave 2: Octave effect type 2,Frequency Frequency of the octave effect.Amount, Amount of octave effect.
• Power: Power wave-shaping effect.Drive, drive for the power effectAmount, Power mixing amount.
• Rectify: Rectifies the signal, by multiplying the negative signalRectification Rectification of the negative signal, from -100% (no rectification), 0% (half rectification) to 100% (full rectification)  Amount, Rectification mixing amount.
• Ring Modulation: The ring modulates (multiplies) different signals together depending on the type.Type Sine, Saw, Sqr & Tri, multiplies the input with the set oscillator.Frequency Sets the oscillator frequency.Amount Sets the ring modulation amount.
• Saturate: Saturation effect.Saturation Saturation levelAmount Saturation mixing amount
• SoftLimit: Soft-limiter effectAmount Soft-limiter amount
• Squarify: Squares the signal (turns it to a square wave), and then lowpass filter it.Negative Amount the negative signal is turned to a square wavePositive Amount the positive signal is turned to a square waveFilter Amount this square wave is lowpass filtered.
• Transient: Distorts the transients, i.e. the beginnings of sounds.Range Transient rangeAmount Transient distortion amount.
• Tube Simulator: Tube distortion effect, by saturating, limiting, rectifying and bandpass filtering the input.Limit, Hard limiter threshold.Rect Amount of rectification, from -100% (no change), 0% (half) to 100% (full).Saturate Amount of saturation..Tone Frequency of the band pass filter.Emphasis Bandwidth of the band pass filter.
• Atan: Mathematically determined distortion effect based, which distorts the sound by waveshaping using an arc-tan function.
• Clipper 2: This effect provides another interpretation of a clipping distortion. Symmetry control is added for further sound shaping.
• FM: This effect uses the input to modulate the frequency of an oscillator generated by RP DISTORT.
• Waveshaper: The waveshaper effects waveshapes the low & high signal differently and then pass it through a low-pass filter.
• Two Band: The last seven distortion effects come in two-band varieties. These are Two Band Cos, Fuzz, Limiter, OverDrive, Po