NIIO AnalogSwitched Slope AD Envelope
- Free
Shipping - No Hassle
Returns - Extended
Warranty - Low Prices
Guaranteed
NIIO Analog Switched Slope
Switched Slope from NIIO Analog is a robust analog attack/decay envelope generator with two different envelope settings, tons of outputs and an organic feeling that will add dynamism to any case. The envelope features two pairs of settings for Attack and Decay which can be switched between independently using the A2 and D2 gate inputs. Easily have a short and long attack and decay dialed in and sequence the change or use an offset for more direct control. The envelope also has two different slope settings that will move from logarithmic to linear to exponential. By default the slope settings get changed with the AD envelope stages: top slope triggers when Attack is high, bottom slope triggers when Decay is low, but this can be broken by patching anything into the Slope CV input.
A T/H slider sets a threshold for a set of four envelope stage outputs: the first stage goes high when the attack goes above the threshold, the second stage goes high when both the attack and decay are above the threshold, the third only when the decay is above the threshold and the final output goes high when the decay stage is under the threshold. In addition, a 10v and 5v envelope output are available along with an inverse envelope shape and a Full Cycle output that's high for the entire duration of the envelope. The Switched Slope from NIIO Analog is one of the most interesting and dense envelope generators out there.
Switched Slope Features
- Analog AD envelope generator
- 2 Pairs of AD knobs individually switchable
- 2 Slope sliders give 2 different shapes from log–lin–exp switchable via CV or normalized with the envelope's high and low points
- T/H Threshold slider sets when the A: High, AD: High, D: High, and D: Low will output
- Full Cycle gate output remains high while the envelope is active
- Trigger and Gate inputs for AD or AHD function
- CV Only Floor and Ceiling inputs let you adjust the voltage range of the envelope
- Slope input switches between two slope shapes
- 0–10v, 0–5v, and 0– -5v Envelope output
- Eurorack module
- Width: 14hp
- Depth: 25mm
- Current draw: 17mA @ +12v, 7mA @ -12v
Welcome Back!
Not a member yet?
You're in!
Join the Club!
As a member, get...
You're in the Club!