NIIO AnalogSeq-Delay 8-step Gate Sequencer
- Free
Shipping - No Hassle
Returns - Extended
Warranty - Low Prices
Guaranteed
NIIO Analog Seq-Delay
NIIO Analog's Sequential Delay/Gate module is an eight-step gate and delayed gate output with adjustable gate length, delay time, and simple logic. Centered around an eight-step sequencer with a three-way switch on each step, this module will output a gate on the Upper section, the Lower section or not at all. The Upper section has a length knob that will sweep through gate lengths based on jumper positions in the back—from 120s up to 3.5s. The Lower section gives you the same Length knob but with front a mounted range switch and includes a Delay knob that will delay the gate from up to 1.6s, based on a range switch. The ALT output send out a gate based on switchable logic parameters: OR, which outputs when either U or L outputs, NOR, which only outputs when neither is high, or L Trig, which sends out a short trigger on an L step. The L Trig setting can be set to output immediately or based on the L Delay setting with a jumper on the back. Add the NIIO Analog Sequential Delay/Gate to your system to create complex rhythms and woozy events.
Seq-Delay Features
- Analog eight-step sequential delay gate module
- 3 Way switches on each step for U, L, or None
- Both U and L sections have gate Length knobs with selectable ranges up to 3.5s
- L section has sweepable Delay knob that will delay the gate
- ALT outputs use logic to output gates or triggers
- ALT Section's OR goes high when either U or L outputs
- ALT Section's NOR goes high when neither section outputs
- ALT Section's L-Trig will send out a 5ms trigger immediately when the sequence is an L step or based on the L Delay time (based on jumpers)
- Eurorack module
- Width: 8hp
- Depth: 25mm
- Current draw: 24mA @ +12v, 0mA @ -12v
Welcome Back!
Not a member yet?
You're in!
Join the Club!
As a member, get...
You're in the Club!