Black CorporationKijimi Polyphonic Analog Synthesizer Module

Item#
N13-0488
$3,999.00

Out of Stock Sign up for stock updates!
  • Free Shipping
    Free
    Shipping
  • No Hassle Returns
    No Hassle
    Returns
  • Warranty
    Extended
    Warranty
  • Low Price Guarantee'
    Low Prices
    Guaranteed

Black Corporation Kijimi

Based on the rare RSF Polykobol, Black Corporation's Kijimi provides access to a sonic realm uncommonly rich for analog polyphonic synths: a world with evolving waveshapes, rich modulation opportunity, polyphonic aftertouch, and full MPE support. Following bravely and deservedly in the footsteps of Black Corp's Deckard's Dream, Kijimi is one of the most powerful analog synthesizers currently available.

Kijimi is eight-voice polyphonic, with two oscillators, lowpass filter, amplifier, two envelopes, and two LFOs per voice. The modulation sources themselves are polyphonic, so with the right controller, it is easily possible to create modulation that behaves differently within each voice.

Each voice offers two oscillators and one suboscillator. The primary oscillators each offer continuously variable waveshape (from triangle to pulse, passing through many novel shapes along the way), as well as semitone-by-semitone tuning controls for easy stacking of intervals. Oscillator two may optionally be detuned positively or negatively, and each oscillator can act as master or slave in sync configurations.

The filter offers only lowpass response—and while that might at first seem like a limitation, its extensive feature set easily overcomes any initial misgivings we initially may have had. Like one might expect, the filter section offers direct cutoff frequency and resonance control, as well as traditional envelope control and continuously variable keyboard tracking—but where it shines is in its direct parameterization of all of the relevant MPE control sources. Both the cutoff and resonance parameters offer direct inverting attenuators for aftertouch and velocity control, making it easy to dial in any combination of influence from these sources in addition to the key tracking and envelope modulation amount controls. Whoa.

And that leads us more deeply into a discussion about the Kijimi's modulation sources. While many synths shine based on their sonic characteristics alone, Kijimi takes an extra step and provides a series of extremely well-thought-out modulation sources and immediately accessible modulation routing, making for not only a superb sonic experience, but a superb playing experience as well.

Kijimi's envelopes are both ADSRs—but unlike the typical keyboard envelope, they offer cycling behavior, in which each envelope can begin to act like a unipolar LFO. The "Mult" parameter switches between multiple frequency ranges, making it easier to dial in envelope response and looping speed. The ADSRs are directly linked to the filter and amplifier, and ADSR2 in particular can be made to modulate the oscillators' pitches and waveshapes as well...but more on that in a moment.

First, we need to address the other two modulation sources internal to Kijimi: two independent LFOs per voice. Each offers continuous control of speed, independent selection of one of six LFO shapes, and optional envelope control—meaning that each LFO has a dedicated envelope for gradually increasing or decreasing its intensity across the duration of the keypress. This can lead to sounds with long, evolving modulation—vibratos and waveshape modulation that fade in over time, filter randomization that gradually becomes more dramatic as time progresses...and much more. This turns the LFOs into uncommonly dynamic modulation effects, capable of dynamically unfolding in relation to the playing style.

And then, what might be the most interesting section of Kijimi's overall architecture: the Modulations section. This section is a modulation matrix, allowing for an enormous array of modulation routing options. Each modulation source can be routed to multiple parameters. The LFOs and ADSR2 offer master attenuators and tactile switch activation of modulation destinations. Each destination can be modulated negatively or positively post-attenuator, making it possible for an LFO to increase an oscillator's pitch while lowering the filter cutoff, for instance...and a number of other complex modulation behaviors. Additionally, this matrix allows the selection of even all parameters simultaneously, making possible a range of behaviors from subtle animations to chaotic, pseudo-generative behavior.

While the LFOs and ADSR2 each offer switch activation of mod destinations, the remaining sources offer direct attenuators for each of their destinations, allowing for any combination of influence into different parts of the voice. This is where some of the most interesting MPE-related behaviors are dialed in: one can use velocity and aftertouch to modulate LFO rates, waveshape, suboscillator amount, pitch bend, cutoff, resonance, and VCA level in any combination with full polyphonic response—making for one of the most expressive and immediate playing experiences of any synth available. Unlike the majority of currently-available MPE-capable synths, Kijimi makes MPE programming direct and easy.

And of course, Kijimi offers extensive storage for factory and user presets, making it simple to get started and to recall your sure-to-be-otherworldly sonic creations. One of the most advanced analog polysynths we've ever seen, Black Corporation's Kijimi would be a welcome addition to any setup—a perfect synth for stage performers, studio musicians, sound designers, and noise makers alike.

Kijimi Features

  • Analog polyphonic synthesizer based on the rare RSF Polykobol
  • Eight voices, complete with full MPE support
  • Endless potential for evolving souds
  • Two oscillators and one sub oscillator per voice
  • Oscillators feature continuously variable wave shape from triangle to pulse
  • Individual semitone coarse tuning for each oscillator, with fine tuning for Osc. 2
  • Switchable sync from Osc 1-2 or 2-1
  • Lowpass filter with tons of modulation options
  • Filter frequency offers direct control attenuators for velocity, aftertouch, ADSR, and key tracking
  • Filter resonance with direct control attenuators for velocity and aftertouch
  • Two cycling ADSR envelopes with multiple speed range options
  • Global portamento control
  • Two LFOs with waveshape selection and dedicated AR envelopes for LFO intensity
  • Extensive modulation routing, with per-source multiple destination selection
  • Positive or negative modulation selectable via modulation routing interface
  • LFO1, LFO2, ADSR2, VCO2, Velocity, and Aftertouch are all freely assignable to multiple parameters
  • Unison mode for staggeringly huge sounds
  • Oscillator waveshape modulation is basically the coolest sound we've ever heard out of an analog polysynth
  • Polyphony: 8 voices
  • Dimensions: 4U 19" rackmount
  • Output: 1/4" mono audio out
  • Headphones: 1x 1/4"
  • MIDI: In/Out/Thru
  • Power: 24VDC PSU (included)
SignalRelated ArticlesBest Synths of 2019Favorite Standalone and Semi-Modular Synths of the YearA Brief History of MIDIIn, Out, and Through TimeK-Board Pro 4 + KijimiThe Evolution of MIDI through MPEWhat is MPE?MIDI Polyphonic Expression + New Dimensions in Sound
Product Demo Videos
Black Corporation Kijimi With Keith McMillen K-Board Pro 4
Black Corporation's Kijimi and Keith McMillen's K-Board Pro 4 make a stellar pair: and synth and controller that combine to offer enormous expressive potential via MPE.

Kijimi is an eight-voice analog synth based on the super rare RSF Polykobol. It not only allows for MPE control, but features a rich set of internal modulation options great for adventurous synthesists and sound designers.

K-Board Pro 4 is an MPE-capable MIDI keyboard, providing extended expressive control with a familiar feel and user interface. By treating each key like an XYZ expression pad, KBP4 provides uncommon musical potential to keyboardists.
Black Corporation Kijimi Polyphonic Analog Synthesizer Module Reviews